Marine Construction Gold Coast & Brisbane

Phone 0412 145 600

Ancillary Equipment

Ancillary Equipment & Enhanced Construction Capabilities

Our barges and workboats are supported by a large variety of ancillary equipment which enhances their construction capabilities.

Pile Driving and Augering Masts for installation of concrete and steel piles, pontoons and jetties. Rock drilling capacity. Barge or excavator mounted for shoreline piling.

Concrete Line Pumps with the ability to pump concrete and full Shotcrete Capability with our shotcrete crew. Chemical dosing application equipment on pump with ability to apply retarder and accelerant allows us to apply concrete with rapid setting, whilst mix can remain in agitator for hours without going off. Essential in the marine tidal environment.

Concrete Grout Pumps with the ability to carry out shotcreting / rendering of shotcrete finish, retaining / revetment wall anchor injecting and general rendering.

Stationery Concrete Agitator for temporary holding of concrete to avoid cost of agitator trucks on board. Concrete can be held in suspension with our retarders for up to 8 hours and then pumped with chemical accelerant added at nozzle to obtain rapid setting. Ideal for long slow pours such as revetment walls, stormwater outlets or erosion control.

Hydraulic Pile Shears for removal of steel, concrete and timber piles up to 600 mm diameter above and below water. This unit was designed and built by Enviromarine services and is the only unit available in Australia. Alleviates the requirement for diving teams whilst removing the high risk element of underwater operations. Works are monitored by Underwater Video Cameras in real time.

Finn Bark Blowing Machine for blowing of bark and loam materials into difficult access areas. Material is normally tipped on deck and loaded into blower on arrival at work site.

Supply and Application of Various Polyurethane Resins to fill voids in revetment walls, permeation grouting of loose soils on riverbanks, lifting and levelling of cracked or misaligned boat ramps.

Hold Fast Anchor Systems to reconstruct failed & failing concrete marine walls using barges & 1.6 Tonne Excavator

Void Scanning Equipment to locate voids behind walls without disrupting existing surface.

Concrete Scanning Equipment to locate rebar and concrete cancer within marine walls.

Sand Blasting and environmentally friendly Soda Blasting of marine structures. Various marine coatings applied after blasting.